VND830SP New Original SOP-10 Integrated Circuit Door driver VND830SP13TR VND830SP VND830SPTR-E

If you are looking for a reliable and efficient power driver IC for your high-voltage switching applications, you may want to consider the VND830ETR-E from STMicroelectronics. This IC is a N-channel power driver that can drive high-voltage loads up to 36V with a current of 9.5A. It comes in a SOP-16 package, which is a small and surface-mountable package that saves space and reduces parasitic inductance. The VND830ETR-E is part of the VIPower™ series, which are smart power devices that integrate a power MOSFET and a protection and control circuit on the same chip.

The VND830ETR-E has several features that make it suitable for high-end switching applications, such as automotive, industrial, and consumer electronics. Some of these features are:

Auto-restart: The VND830ETR-E has an auto-restart function that automatically resumes normal operation after a fault condition is removed. This function prevents the device from being locked in an off state due to a transient fault, such as a short circuit or an overcurrent. The auto-restart function also reduces the need for external components, such as reset circuits or microcontrollers, to monitor and control the device.

Fault protection: The VND830ETR-E has a comprehensive fault protection system that protects the device and the load from various abnormal conditions, such as overcurrent, overvoltage, overtemperature, and open load. The device has a fixed current limit that prevents excessive current from flowing through the device and the load. The device also has a thermal shutdown that turns off the device when the junction temperature exceeds a certain threshold. The device can detect an overvoltage condition on the load and clamp the output voltage to a safe level. The device can also detect an open load condition, which occurs when the load is disconnected or broken, and report it to the microcontroller via a diagnostic feedback pin.

Non-inverting input: The VND830ETR-E has a non-inverting input that allows the device to be controlled by a positive logic signal. This means that the device is turned on when the input signal is high and turned off when the input signal is low. This simplifies the interface with the microcontroller and reduces the need for additional logic components, such as inverters or level shifters.

High-side configuration: The VND830ETR-E has a high-side configuration that allows the device to be connected between the positive supply and the load. This configuration is advantageous for applications that require a common ground for the load and the microcontroller, such as inductive loads or multiplexed loads. The high-side configuration also enables the device to be used in half-bridge or full-bridge topologies, which are commonly used for motor control or DC-DC conversion.

The VND830ETR-E is an ideal choice for high-voltage switching applications that require high performance, reliability, and efficiency. The device can handle high currents and voltages, while providing auto-restart and fault protection features. The device can be easily controlled by a positive logic signal and can be used in various configurations, such as high-side, half-bridge, or full-bridge. The device comes in a SOP-16 package, which is a compact and surface-mountable package that reduces the board space and the parasitic effects. The VND830ETR-E is a smart power device that integrates a power MOSFET and a protection and control circuit on the same chip, making it a convenient and cost-effective solution for your high-voltage switching applications.